Contractors Unlimited

Mustang Awarded Feed for Chevron Jack & St. Malo Deepwater Project

Wood Group Mustang, part of energy services company John Wood Group PLC, has been selected by Chevron to perform front-end engineering design for topsides facilities for the Chevron Jack & St. Malo Project, located in approximately 7,000 feet of water in the Gulf of Mexico (GOM) and about 270 miles southwest of New Orleans in the Walker Ridge area. Jack & St. Malo will be a floating semi-submersible production facility with an initial nameplate capacity between 120,000 and 150,000 BOPD, 37.5 MMscf/D gas, and provisions for a future 200,000 BPD water injection.

The FEED, which will be performed by a peak staff of almost 70, started in 2nd quarter 2009, with completion expected in 2nd quarter 2010. Mustang completed pre-FEED services for the project in 1st quarter 2009.

Mustang also performed topsides design and systems integration services for Chevron's Tahiti spar facility in deepwater GOM, another of Chevron's strategic projects, and is currently providing engineering support for the offshore hook-up, commissioning and start-up.

Mustang has designed more semi-submersible topsides production facilities in the Gulf of Mexico than any other company, including topsides design for Chevron's Blind Faith, and for the largest producing semi-submersible in the world, Thunder Horse.

Posted 06/05/09

Find out more about:

Mustang »
Wood Group »
Chevron »

Search for more News



Effective Planning and Step-by-Step Execution of Planned Maintenance Operations
Effective Planning and Step-by-Step Execution of Planned Maintenance Operations


Tool and Manufacturing
Engineers' Handbook




Advertising || About Us || Contact Us || Search || Legal || Tell a Friend
© Copyright 2009 - All rights reserved